Honda CBR1000RR ECU
Flashing Service 2008-16
Dano's Performance
now offers ECU Flashing for the 2008-16 Honda CBR1000RR models. This service is
only available to our U.S. customers. Our ECU flash removes all the restrictions programmed into the ECU from the factory. These restrictions
greatly hinder engine performance and throttle response. We will optimize both
the ignition and the fuel curve which will unleash horsepower from your engine.
This ECU flash will all but eliminate the need for a Power Commander and
ignition module. Keep in mind you can pick and chose the options you want and
don't want programmed into your ECU. The following is a list of options
available with our ECU flash service:
Optimize fuel curves across all gear
( same as a Power Commander)
Optimize
ignition curves across all gears (remove RPM & throttle based ignition restrictions)
Raise RPM limiter
Adjust idle speed
Adjust in gear idle speed
Disable top speed limiter
Disable pair valve
Disable deceleration fuel cut
Disable steering damper
Disable O2 sensor
Disable exhaust valve
Reset radiator fan turn on/off
temperature (205 / 195 )
***Disclaimer : For closed course competition use only.
Not intended for street use***
Once you have made your purchase we will email you a
wavier form which you must fill out and send it over to us together with your
ECU.
In order for us to
provide this service you will need to send us your ECU. We recommend mailing
your ECU via Priority mail to the address on the main page of our website. Make
your payment via Pay Pal then mail your ECU to us. When sending your ECU please
include your name, address and telephone number. Once we receive your ECU we
will give you a call and go over the items you want programmed into your ECU.
Based on the mods you have done to your bike we will download the correct fuel
map from our data base. Once we have completed the flash service we will
Priority mail your ECU back to you the very next day. Priority mail typically
takes 2-3 days for delivery.
Click here to make your
purchase
Honda CBR1000RR ECU
Flashing Service 2006-07
Dano's Performance
now offers ECU Flashing for the 2006-07 Honda CBR1000RR models. This service is
only available to our U.S. customers. Our ECU flash removes all the restrictions programmed into the ECU from the factory. These restrictions
greatly hinder engine performance and throttle response. We will optimize both
the ignition and the fuel curve which will unleash horsepower from your engine.
This ECU flash will all but eliminate the need for a Power Commander and
ignition module. Keep in mind you can pick and chose the options you want and
don't want programmed into your ECU. The following is a list of options
available with our ECU flash service:
Optimize fuel curves across all gear
( same as a Power Commander)
Optimize
ignition curves across all gears (remove RPM & throttle based ignition restrictions)
Raise RPM limiter
Disable pair valve
Disable steering damper
Disable O2 sensor
Disable exhaust valve
Reset radiator fan turn on/off
temperature (205 / 195 )
**Disclaimer : For closed course competition use only.
Not intended for street use***
Once you have made your purchase we will email you a
wavier form which you must fill out and send it over to us together with your
ECU.
In order for us to
provide this service you will need to send us your ECU. We recommend mailing
your ECU via Priority mail to the address on the main page of our website. Make
your payment via Pay Pal then mail your ECU to us. When sending your ECU please
include your name, address and telephone number. Once we receive your ECU we
will give you a call and go over the items you want programmed into your ECU.
Based on the mods you have done to your bike we will down load the correct fuel
map from our data base. Once we have completed the flash service we will
Priority mail your ECU back to you the very next day. Priority mail typically
takes 2-3 days for delivery.
Click here to make your
purchase
Honda CBR1000RR (2017-23) ECU
Flashing Service
Now available the ECU
flash for the SP1 & SP2 models
Dano's Performance
now offers ECU Flashing for the 2017-23 Honda CBR1000RR models. This service is
only available to our U.S. customers. Our ECU flash removes all the restrictions programmed into the ECU from the factory. These restrictions
greatly hinder engine performance and throttle response. We will optimize both
the ignition and the fuel curve which will unleash horsepower from your engine.
This ECU flash will all but eliminate the need for a Power Commander and
ignition module. Keep in mind you can pick and chose the options you want and
don't want programmed into your ECU. NOTICE:
It is highly recommended to start the bike without modifications after ECU has
been flashed. After bike has been run, you can proceed with ais/pair removal and
exhaust installation. This will prevent any check engine lights or dash lockouts
due to the EURO4/5 Emissions Standard Programming on factory ECU'S.
The following is a list of options
available with our ECU flash service:
Optimize fuel curves across all gear
( same as a Power Commander)
Optimize
ignition curves across all gears (remove RPM & throttle based ignition restrictions)
Raise RPM limiter
Disable pair valve
Disable deceleration fuel cut
Disable top speed
limiter
Disable steering damper
Disable O2 sensor
Disable exhaust valve
Disable Evap canister
Reset radiator fan turn on/off
temperature (205 / 195 )
Remove throttle plate restrictions
**Disclaimer : For closed course competition use only. Not
intended for street use***
Once you have made your purchase we will email you a wavier
form which you must fill out and send it over to us together with your ECU.
In order for us to
provide this service you will need to send us your ECU. We recommend mailing
your ECU via Priority mail to the address on the main page of our website. Make
your payment via Pay Pal then mail your ECU to us. When sending your ECU please
include your name, address and telephone number. Once we receive your ECU we
will give you a call and go over the items you want programmed into your ECU.
Based on the mods you have done to your bike we will down load the correct fuel
map from our data base. Once we have completed the flash service we will
Priority mail your ECU back to you the very next day. Priority mail typically
takes 2-3 days for delivery.
Click here to make
your purchase
Honda CBR1000RR (2017-23) ECU
Flashing Service together with the Honda Quick Shifter / Auto Blipper
Dano's Performance is now offering our
2017-23 Honda CBR1000RR ECU flash service together with the Honda Quick Shifter
/ Auto Blipper Honda part number (08U70-MKF-D40) for the fantastic price of
$730.00
!!! With the retail price of the Honda Quick Shifter / Auto Blipper being
$579.95 this combo package saves you $39.95 by purchasing these two items
together.
Click here to make
your purchase
Dano's
Performance Honda CBR1000RR & CBR600RR ECU flash along with our Stand Alone Quick Shifter
Dano's Performance is now offering our 2006-16 Honda CBR1000RR and 2007-23 Honda
CBR600RR ECUflash service
together with our Stand Alone Quick Shifter for the incredible price of only
$465.00 !!! Just make your purchase then send us the ECU from your
bike along with your name, address and telephone number. Once we receive your
ECU we will give you a call and go over the features you would like programmed
into your ECU. Then we will ship your ECU back to you along with a complete
Stand Alone Quick shifter package.
This offer only available to U.S.
residents
Click here to make your
purchase
All
payment transactions are done through Pay pal which is fully secure. It is not
necessary to have a Pay pal account for you to be able to purchase on our
website. Shipping is done via U.S. Priority mail with delivery in 2-3 days.
Honda CBR600RR ECU Flash
Service
Dano's Performance
now offers ECU Flash services for the 2007-23 Honda CBR600RR models. This service
is only available to our U.S. customers. Our ECU flash removes all the restrictions programmed into the ECU from the factory. These restrictions
greatly hinder engine performance and throttle response. We will optimize both
the ignition curve and the fuel curve which will unleash more horsepower from
your engine. The ECU flash will all but eliminate the need for a Power Commander
and ignition module. Keep in mind you can pick and chose the options you want
and don't want programmed into your ECU. The following is a list of options
available with our ECU Flash service:
Optimize fuel curves across all gears
( same as a Power Commander )
Optimize ignition curves across all
gears ( remove RPM and throttle based restrictions )
Raise RPM limiter
Reset radiator fan turn on/off
temperature (205/195)
Adjust idle speed
Adjust in gear idle speed
Disable deceleration fuel cut
Disable pair valve
Disable steering damper
Disable O2 sensor
Disable exhaust valve
**Disclaimer : For closed course competition use only.
Not intended for street use***
Once you have made your purchase we will email you a
wavier form which you must fill out and send it over to us together with your
ECU.
In order for us to
provide this service you will need to send us your ECU. We recommend mailing
your ECU via Priority mail to the address on the main page of our website. Make
your payment via Pay Pal then mail your ECU to us. When sending your ECU please
include your name, address and telephone number. Once we receive your ECU we
will give you a call and go over the items you want programmed into your ECU.
Based on the mods you have done to your bike we will down load the correct fuel
map from our data base. Once we have completed the flash service we will
Priority mail your ECU back to you the very next day. Priority mail typically
takes 2-3 days for delivery.
Click here to make your
purchase
Honda CBR650R and CB650R ECU Flash
Service
Dano's Performance
now offers ECU Flash services for the 2018-20 Honda CBR650R and CB650R models. This service
is only available to our U.S. customers. Our ECU flash removes all the restrictions programmed into the ECU from the factory. These restrictions
greatly hinder engine performance and throttle response. We will optimize both
the ignition curve and the fuel curve which will unleash more horsepower from
your engine. The ECU flash will all but eliminate the need for a Power Commander
and ignition module. Keep in mind you can pick and chose the options you want
and don't want programmed into your ECU. The following is a list of options
available with our ECU Flash service:
Optimize fuel curves across all gears
( same as a Power Commander )
Optimize ignition curves across all
gears ( remove RPM and throttle based restrictions )
Raise RPM limiter
Disable O2 sensor
**Disclaimer : For closed course competition use only.
Not intended for street use***
Once you have made your purchase we will email you a
wavier form which you must fill out and send it over to us together with your
ECU.
In order for us to
provide this service you will need to send us your ECU. We recommend mailing
your ECU via Priority mail to the address on the main page of our website. Make
your payment via Pay Pal then mail your ECU to us. When sending your ECU please
include your name, address and telephone number. Once we receive your ECU we
will give you a call and go over the items you want programmed into your ECU.
Based on the mods you have done to your bike we will down load the correct fuel
map from our data base. Once we have completed the flash service we will
Priority mail your ECU back to you the very next day. Priority mail typically
takes 2-3 days for delivery.
Click here to make your
purchase
Honda CB1000R ECU
Flashing Service 2008-17
Dano's Performance
now offers ECU Flashing for the 2008-17 Honda CB1000R models. This service is
only available to our U.S. customers. Our ECU flash removes all the restrictions programmed into the ECU from the factory. These restrictions
greatly hinder engine performance and throttle response. We will optimize both
the ignition and the fuel curve which will unleash horsepower from your engine.
This ECU flash will all but eliminate the need for a Power Commander and
ignition module. Keep in mind you can pick and chose the options you want and
don't want programmed into your ECU. The following is a list of options
available with our ECU flash service:
Optimize fuel curves across all gear
( same as a Power Commander)
Optimize
ignition curves across all gears (remove RPM & throttle based ignition restrictions)
Raise RPM limiter
Disable pair valve
Disable deceleration fuel cut
Disable O2 sensor
Disable top speed limiter
Reset radiator fan turn on/off
temperature (205 / 195 )
**Disclaimer : For closed course competition use only.
Not intended for street use***
Once you have made your purchase we will email you a
wavier form which you must fill out and send it over to us together with your
ECU.
In order for us to
provide this service you will need to send us your ECU. We recommend mailing
your ECU via Priority mail to the address on the main page of our website. Make
your payment via Pay Pal then mail your ECU to us. When sending your ECU please
include your name, address and telephone number. Once we receive your ECU we
will give you a call and go over the items you want programmed into your ECU.
Based on the mods you have done to your bike we will down load the correct fuel
map from our data base. Once we have completed the flash service we will
Priority mail your ECU back to you the very next day. Priority mail typically
takes 2-3 days for delivery.
Click here to make your
purchase
Honda CB1000R ECU
Flashing Service 2018-22
Dano's Performance
now offers ECU Flashing for the 2018-22 Honda CB1000R models. This service is
only available to our U.S. customers. Our ECU flash removes all the restrictions programmed into the ECU from the factory. These restrictions
greatly hinder engine performance and throttle response. We will optimize both
the ignition and the fuel curve which will unleash horsepower from your engine.
This ECU flash will all but eliminate the need for a Power Commander and
ignition module. Keep in mind you can pick and chose the options you want and
don't want programmed into your ECU. The following is a list of options
available with our ECU flash service:
Optimize fuel curves across all gear
( same as a Power Commander)
Optimize
ignition curves across all gears (remove RPM & throttle based ignition restrictions)
Raise RPM limiter
Remove throttle plate restrictions
Disable pair valve
Exhaust valve (Only 2021-22 models)
Disable deceleration fuel cut (Only
2018-20 models)
Disable O2 sensor
Disable top speed limiter
Reset radiator fan turn on/off
temperature (205 / 195 ) (Only 2018-20 models)
**Disclaimer : For closed course competition use only.
Not intended for street use***
Once you have made your purchase we will email you a
wavier form which you must fill out and send it over to us together with your
ECU.
In order for us to
provide this service you will need to send us your ECU. We recommend mailing
your ECU via Priority mail to the address on the main page of our website. Make
your payment via Pay Pal then mail your ECU to us. When sending your ECU please
include your name, address and telephone number. Once we receive your ECU we
will give you a call and go over the items you want programmed into your ECU.
Based on the mods you have done to your bike we will down load the correct fuel
map from our data base. Once we have completed the flash service we will
Priority mail your ECU back to you the very next day. Priority mail typically
takes 2-3 days for delivery.
Click here to make your
purchase
Honda CBR1000RR-R (2020-23) ECU
Flashing Service
Dano's Performance
now offers ECU Flashing for the 2020-23 Honda CBR1000RR-R models. This service is
only available to our U.S. customers. Our ECU flash removes all the restrictions programmed into the ECU from the factory. These restrictions
greatly hinder engine performance and throttle response. We will optimize both
the ignition and the fuel curve which will unleash horsepower from your engine.
This ECU flash will all but eliminate the need for a Power Commander and
ignition module. Keep in mind you can pick and chose the options you want and
don't want programmed into your ECU. NOTICE:
It is highly recommended to start the bike without modifications after ECU has
been flashed. After bike has been run, you can proceed with ais/pair removal and
exhaust installation. This will prevent any check engine lights or dash lockouts
due to the EURO4/5 Emissions Standard Programming on factory ECU'S.
The following is a list of options
available with our ECU flash service:
Optimize fuel curves across all gear
( same as a Power Commander)
Optimize
ignition curves across all gears (remove RPM & throttle based ignition restrictions)
Raise RPM limiter
Disable pair valve
Disable top speed
limiter
Disable O2 sensor
Disable exhaust valve
Disable Evap canister
Remove throttle plate restrictions
**Disclaimer : For closed course competition use only. Not
intended for street use***
Once you have made your purchase we will email you a wavier
form which you must fill out and send it over to us together with your ECU.
Click here to make your
purchase
