Yamaha R9 and MT09 Superbike Package

 Dano's Performance has developed this Superbike Package for the 2021-25 Yamaha MT-09 and the 2025 Yamaha R9 models. One of the great features of this package is that you only need to remove is the cylinder head to install it. The typical horsepower gain achieved with this package is 19-21 horsepower (139-141HP). If you combine this Superbike Package together with the velocity stacks listed below the horsepower output will jump to 145HP. Also recommended is a good quality exhaust system and a Woolich Racing with the  Auto Tune system  to allow for proper tuning. The following is all that is included in our Yamaha MT-09 and Yamaha R9 Superbike Package:

                          Cylinder head porting which maximizes intake and exhaust air flow

                     Install new valve stem seals

                         Three angle valve job

                                  Machine cylinder head base to increase compression

                             Performance camshaft set with slotted sprockets

                         Head gasket

                         Manual cam chain tensioner for precise cam timing

  The total price for this Superbike package is $2,495.00.  All we need for you to send us is your complete cylinder head  and when completed we will ship you back the complete package. The cylinder head will be complete with the valve clearances set and ready to bolt back on to your engine. The cams will need to be degreed and the clearances will need to be checked. You may also choose to send us your complete motor and when completed we will ship the complete motor back to you ready to install. If you should choose to send us the complete motor we will also degree the cams and the total price will be $3195.00 + shipping cost. If you need assistance on how to package your motor for shipping let us know we can help you.

Yamaha R9 and MT09 velocity stacks

  We developed these velocity stacks for the 2021-25 Yamaha MT-09 and the 2025 Yamaha R9 models. These velocity stacks include a complete set of installation instructions. We include a reconfiguration to the intake snorkel which directs the incoming air to the center of the air filter to maximize efficiency. Simply installing these velocity stacks will see a gain of 4-5 horsepower from 8,500 RPM to redline for a nice top end rush !!!!!