Cylinder Head
Porting Service
Increasing airflow
in and out of the combustion chamber will increase both horsepower and torque.
We will take your cylinder head to the next level achieving maximum
airflow through the intake and exhaust ports. Also we will perform a three angle
valve job for a perfect airtight seal between the valves and valve seats. If your goal is achieving
the most performance from your engine then cylinder head porting should be
considered a necessary step.
The following is a list
of all steps performed with our cylinder head porting:
Disassemble and reassemble cylinder head
Soda blast to remove all carbon
Port intake and exhaust ports to maximize
airflow
Match intake manifolds to intake ports
Resurface cylinder head base
Three angle valve job
Install new valve stem seals
$895.00 + parts Most late model 4 cylinder
16 valve Sportbike heads
$660.00 + parts
Three cylinder heads
$495.00 + parts Two
cylinder heads
Three angle valve job
The following is a list
of all steps performed with our three angle valve job:
Disassemble and reassemble cylinder head
Soda blast to remove all carbon
Three angle valve job
Install new valve stem seals
$225.00 + parts Most late model 4 cylinder
Sportbike (16 valves)
$190.00 + parts Two
cylinder heads (8 valves)
$145.00
Single cylinder - dirt bike (4
valves) includes resurfacing
Resurface cylinder
head
$70.00